How do I pair my SmallGarden to Wi-Fi?

*If you have an Eero brand router, please follow these instructions to configure your Wi-Fi router before starting the pairing process.

Troubleshooting

1. Ensure you are on a 2.4GHz Wi-Fi network (How to determine if you are on a 2.4GHz network)
2. Restart your iOS device
3. Perform a Factory Reset 
4. If you are repairing your SmallGarden, confirm that your SmallGarden is removed from the Home App.

To pair your SmallGarden to Wi-Fi follow the below steps:

1. Ensure you have the latest version of the ēdn App. Download here for iOS.
2. Plug in your SmallGarden, and hold the button on the side for 3 seconds until it blinks blue, then let go. The light will now blink green, indicating you have entered pairing mode.
3. Open the ēdn app and if this your first garden, you'll be presented with a 'Let's Pair' button. If this is not your first garden, select the small '+' sign from the top right corner of the Dashboard screen.
   1. 
4. Make sure your iOS device is connected to your home 2.4GHz network. If you need help determining if you are on a 2.4GHz network, please reference this article.
5. Locate the QR Code on your SmallGarden light strip, the back of the user manual, or inside the packaging.
6. Scan the QR code on the SmallGarden.
   1. 
7. Select 'Add to Home'
   1. 
8. The SmallGarden will now connect to your Home 2.4GHz network.
   1. 
9. Select your SmallGarden's location (this is where it will be located within the Home App).
   1. 
10. Name your SmallGarden.
    1. 
11. Select any Automations (we do not recommend setting any automations that can interfere with your SmallGarden's required 12hr daily light schedule).
    1. 
12. Allow your SmallGarden to sync with the ēdn cloud!
    1. 

If you have any questions or need further assistance, please contact us support@edntech.com